TORQUE CONVERTER REPLACEMENT/REPAIR - TM-10-3930-673-340334

TM 10-3930-673-34

7-3. TORQUE CONVERTER REPLACEMENT/REPAIR (CONT)

WARNING

Use care when removing snap and

retaining rings. Snap and retaining

rings are under spring tension and

can act as projectiles when released

and could cause severe eye injury.

(a)

Remove snap ring (10), bearing (11),

and oil seal (12) from torque

converter cover (8).

(b)

Remove lubrication fitting (13) from

torque converter cover (8).

TR00188

(2)

Remove parts (14 through 16), front

cover (17), parts (18 through 27), and

turbine (28).

(a)

Remove 12 screws (14), lockwashers

(15), and converter input shaft (16)

from front cover (17). Discard

(b)

Mark front cover (17) and

impeller (18) for ease of assembly.

Remove 20 nuts (19), washers (20),

screws (21), and front cover from

impeller.

(c)

Remove outer thrust race (22),

needle thrust bearing (23), and

inner thrust race (24) from turbine

hub (25).

(d)

Using suitable puller, remove

bearing (26) from input shaft (16).

TR00189

(e)

Remove preformed packing (27)

from front cover (17). Discard

preformed packing.

(f)

Remove turbine hub (25) and turbine (28) from impeller (18).

7-4