 |
|||
|
|
|||
|
Page Title:
FUEL INJECTION PUMP REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 10-3930-673-34
4
This Task Covers:
a. Removal
c. Inspection
b. Cleaning
d. Installation
INITIAL SETUP
Equipment Condition (Cont)
Tools and Special Tools
STE/ICE Pulse tachometer and drive assembly
Tool Kit, General Mechanic's: Automotive
removed (TM 10-3930-673-20)
(Item 23, Appendix D)
Accelerator cable removed
Engine Barring Tool (Item 7, Appendix D)
(TM 10-3930-673-20)
Wrench, Torque, 0-175 lb-ft
(Item 28, Appendix D)
Personnel Required
Equipment Condition
Two
Fuel shut-off solenoid disconnected
(TM 10-3930-673-20)
Materials/Parts
Fuel drain tubes disconnected
Gasket
(TM 10-3930-673-20)
Lockwasher
Fuel supply tubes disconnected
Preformed Packing
(TM 10-3930-673-20)
Seal
High pressure fuel tubes disconnected
(TM 10-3930-673-20)
a. Removal.
WARNING
Spilled fuel is slippery and flammable.
Clean up and dispose of spilled fuel
TR00003
properly. Failure to follow this warning
may cause injury or death.
(1)
Tag and mark hose (1). Loosen hose clamp
(2) and disconnect hose from elbow (3).
Remove elbow from tee (4).
(1.1) Tag and mark hose (5). Disconnect hose
from adapter (6) and remove adapter from
tee (4).
(1.2) Remove tee (4) from fuel injection pump (7).
(1.3) Tag and mark hose (8). Disconnect hose
from elbow (9) and remove elbow from fuel
injection pump (7).
TR01050
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals