FLYWHEEL HOUSING AND COVER REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

3-15. FLYWHEEL HOUSING AND COVER REPLACEMENT/REPAIR (CONT)

(c)

Remove installation and alignment

tool and trim gasket even with oil

pan mounting surface at points "A".

TR01234

CAUTION

The rear oil seal lip must be clean

to help prevent seal leaks.

Always use the seal pilot to install rear

seal. Failure to do so could result in a

damaged seal.

(5)

Install rear oil seal (8) using seal

pilot supplied with oil seal kit.

(a)

Wipe oil seal (8) lip clean with a

TR01235

clean lint-free rag. Install oil seal

with seal pilot onto crankshaft (B).

(b)

Push oil seal (8) onto crank and remove seal pilot.

CAUTION

Tap alignment and installation tool

at the 12, 3, 6, and 9 o'clock

positions only. Striking the tool at

other locations could damage the

seal carrier.

(6)

Position rear oil seal (8) to correct

depth in rear cover (3) with

installation and alignment tool.

(a)

Place installation and alignment

tool onto crankshaft and against oil

TR01236

seal (8) carrier.

3-102