ENGINE ASSEMBLY REPLACEMENT - continued

TM 10-3930-673-34

3-3. ENGINE ASSEMBLY REPLACEMENT (CONT)

NOTE

If new engine is to be installed, remove engine components in Step (9) below.

Components removed will be installed on new engine.

(9)

Remove engine (117) components.

(a)

Remove fan (TM 10-3930-673-20).

(b)

Remove alternator (TM 10-3930-673-20).

(c)

Remove STE/ICE fuel pressure sender and STE/ICE fuel filter differential pressure switch

(TM 10-3930-673-20).

(d)

Remove starter relay (TM 10-3930-673-20).

(e)

Remove oil sampling valve and fittings (TM 10-3930-673-20).

(f)

Remove engine oil pressure and water temperature switches (TM 10-3930-673-20).

(g)

Remove engine oil pressure and water temperature senders (TM 10-3930-673-20).

(h)

Remove engine mounts (Para 3-4).

(i)

Remove flywheel housing cover (Para 3-15).

(j)

Remove coupling from flywheel (Para 3-14).

(k)

Remove ether start thermostat (TM 10-3930-673-20).

b. Installation.

NOTE

If new engine is to be installed, install engine components in Step (1) below

(1)

Install components on engine (117).

(a)

Install engine mounts (Para 3-4).

(b)

Install ether start thermostat (TM 10-3930-673-20).

(c)

Install water temperature and oil pressure senders (TM 10-3930-673-20).

(d)

Install engine oil pressure and water temperature switches (TM 10-3930-673-20).

(e)

Install oil sampling valve and fittings (TM 10-3930-673-20).

(f)

Install starter relay (TM 10-3930-673-20).

(g)

Install STE/ICE fuel pressure sender and STE/ICE fuel filter differential pressure switch

(TM 10-3930-673-20).

(h)

Install alternator (TM 10-3930-673-20).

(i)

Install fan (TM 10-3930-673-20).

(j)

Install coupling to flywheel (Para 3-14).

(k)

Install flywheel housing cover (Para 3-15).

3-14