Installation - TM-10-3930-673-20-20689

TM 10-3930-673-20-2

(b)

Remove sampling valve (7) from elbow

(8).

(c)

Remove tube (9) from elbow (8) and tee

(10).

(d)

Remove elbow (8) and preformed

packing (11) from filter base (2). Discard

preformed packing.

(e)

Remove four screws (12), lockwashers

(13), washers (14), spacer (15), and filter

base (2) from bulkhead (3). Discard

lockwashers.

b. Installation.

(1)

Install filter base (2) on bulkhead (3).

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

TR00698

and clothing. To avoid injury or death,

keep away from open fire and use in a

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and

water.

(a)

Apply sealing compound to threads of four screws (12).

(b)

Install spacer (15) and filter base (2) on bulkhead (3) with four washers (14), lockwashers (13), and

screws (12).

(c)

Install preformed packing (11) and elbow (8) in filter base (2).

(d)

Apply sealing compound to threads of tube (9) and install on tee (10) and elbow (8).

(e)

Apply sealing compound to threads of sampling valve (7) and install in elbow (8).