TRANSMISSION CONTROL VALVE LINKAGE REPLACEMENT

TM 10-3930-673-20-2

9-10. TRANSMISSION CONTROL VALVE LINKAGE REPLACEMENT

This Task Covers:

a. Removal

b. Installation

INITIAL SETUP

Materials/Parts

Tools and Special Tools

Cotter Pin

Tool Kit, General Mechanic's: Automotive

Cotter Pin

(Item 18, Appendix F)

Lockwashers (4)

Lockwasher

Equipment Condition

Lockwashers (2)

Transmission cable assemblies removed at

transmission control valve (Para 9-3)

a. Removal.

(1)

Remove parts (1 through 21) from

transmission control valve (22).

(a)

Remove cotter pin (1), washer (2), and

pin (3) from upper control valve linkage.

Discard cotter pin.

TR00003

(b)

Remove two screws (4), lockwashers (5),

spacers (6), and bracket (7) from

transmission control valve (22). Discard

lockwashers.

(c)

Separate parts (7 through 21) from

transmission control valve (22).

(d)

Repeat Steps (1)(a) through (1)(c) for

lower control valve linkage parts.

(2)

Remove parts (8 through 13) from each

bracket (7).

(a)

Remove nut (8), lockwasher (9), and

washer (10). Discard lockwasher.

(b)

Remove rocker arm (11), spacer (12),

and screw (13).

TR00566

(3)

Remove parts (14 through 21) from each

rocker arm (11).

(a)

Remove cotter pin (14), washer (15), and pin (16). Discard cotter pin.

(b)

Separate two links (17), four washers (18), and rocker arm (11).

(c)

Remove two nuts (19), lockwashers (20), and screws (21). Discard lockwashers.

9-25