 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
8-31. FLOODLIGHTS AND SPOTLIGHTS REPLACEMENT/REPAIR (CONT)
(2)
Install spotlight (16) on cab (17) with
mounting hardware (parts 8 through 15).
(a)
From outside cab (12), aline marks and
push shaft (15) of spotlight (16) through
hole in bracket (9) until shaft goes
through hole in cab.
(b)
From inside cab (17), position collar (12)
on shaft (15) and tighten setscrew (11).
(c)
From inside cab (17), position handle (14)
of spotlight (16) on shaft (15). Twist
handle on shaft until handle slides into
place.
(d)
Tighten screw (13) on handle (14).
(e)
From outside cab (17), tighten setscrew
(10) on spotlight (16). Tighten setscrew
(8) on bracket (9) so that spotlight is
secure but movable.
(f)
Apply small amount of oil to bushing of
bracket (9).
(3)
Connect spotlight connector (6) to vehicle
wiring harness connector (7).
(4)
Connect negative battery cable (Para 8-44).
e. Floodlight Bulb Replacement.
WARNING
To prevent personal injury from
accidental glass breakage, wear a pair of
heavy leather gloves or other suitable
hand protection when replacing sealed
beam bulbs.
(1)
Carefully pry flexible housing (23) of
floodlight (3) from around sealed beam bulb
(24) until bulb is free of housing.
(2)
Remove sealed beam bulb (24) from
floodlight (3). Discard sealed beam bulb.
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals