|
|
TM 10-3930-673-20-2
5
This Task Covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Engine OFF and cool (TM 10-3930-673-10)
Tool Kit, General Mechanic's: Automotive
(Item 18, Appendix F)
Materials/Parts
Shop Equipment, Automotive Maintenance, Common
Locknut
No. 2 Less Power
(Item 15, Appendix F)
a. Removal.
TR00003
NOTE
Air conditioner compressor belt
TR00057
deflection when measured midway
between longest span of belt should be no
greater than 1/2 in (13 mm). If deflection
is greater than 1/2 in. (13 mm), adjust
drive belt.
(1)
Remove nut (1) and screw (2) from
A/C compressor (3).
(2)
Loosen two locknuts (4 and 5) and screws (6
and 7).
(3)
Remove locknut (8) and screw (9) from
adjusting arm (10) and A/C compressor (3).
Discard locknut.
(4)
Pivot air conditioner compressor (3) toward
engine (11) and remove belt (12) from two
pulleys (13 and 14).
TR00880
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |