 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
(3)
Install accelerator cable (1) on accelerator
pedal (2).
(a)
Install clevis (5) on accelerator pedal
linkage (6) with clevis pin (4) and spring
clip (3).
(b)
Install spring (7) on accelerator pedal
2
linkage (6).
1
(c)
Install cable (1) on bracket (11) with
10
cable clamp (10), two washers (9), and
7
8
1
locknuts (8).
(4)
Check adjustment of accelerator cable (1).
Adjust if necessary. Refer to c. Adjustment
below.
6
11
9
3
4
5
TR00380
c. Adjustment .
(1)
Check adjustment of accelerator cable (1).
NOTE
With fuel injection pump linkage tight
against idle stop screw, clevis pin should
fit freely through clevis of cable. If not,
adjust cable.
(2)
If necessary, adjust accelerator cable (1).
(a)
Loosen nuts (19) and (23) at bracket (21).
(b)
Reposition cable (1) until fuel injection
pump linkage (12) is in neutral position.
12
(c)
Tighten nuts (19) and (23).
23
1
19
21
5-63
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals