 |
|||
|
|
|||
|
Page Title:
ENGINE OIL FILLER NECK REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 10-3930-673-20-2
2
This Task Covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Engine OFF and cool (TM 10-3930-673-10)
Tool Kit, General Mechanic's: Automotive
(Item 18, Appendix F)
Materials/Parts
Wrench, Torque 0-175 lb-ft (0-237 Nm)
Packing, Preformed
(Item 24, Appendix F)
Crows Foot Set (15 mm)
a. Removal.
(1)
Remove cap (1) from oil filler neck (2).
(2)
Support oil filler neck (2) and remove two
screws (3) and data plate (4) from filler neck
and engine block (5).
TR00003
(3)
Remove oil filler neck (2) and preformed
packing (6) from engine block (5). Discard
preformed packing.
1
6
b. Installation.
(1)
Align and support preformed packing (6)
and oil filler neck (2) on engine block (5).
(2)
Install oil filler neck (2) and data plate (4) on
engine block (5) with two screws (3). Tighten
3
screws to 32 lb-ft. (43.39 Nm).
(3)
Install cap (1) on oil filler neck (2).
2
5
END OF TASK
4
TR00155
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals