 |
|||
|
|
|||
|
Page Title:
TEMPERATURE GAGE DOES NOT OPERATE - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-20-1
INSTRUMENT
PANEL
SCREW
VOLTAGE TEST
TEMPERATURE
GAGE
(1) Set multimeter to volts dc.
(2) Connect multimeter positive lead (+) to
temp gage where wire 15 connects.
(3) Connect multimeter negative lead () to
known good ground.
(4) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
(a) If voltage is present, go to Step 4
of this fault.
(b) If voltage is not present, replace
temp gage (Para 8-6).
(5) Turn engine start switch OFF
(TM 10-3930-673-10).
ENGINE START
SWITCH
VOLTAGE TEST
(1) Set multimeter to volts dc.
(2) Connect multimeter positive lead (+) to
engine water temperature transducer
WIRE 15
where wire 15 connects.
(3) Connect multimeter negative lead () to
known good ground.
(4) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
(a) If voltage is present, replace temp.
transducer (Para 8-36).
(b) If voltage is not present, go to
Step 5 of this fault.
(5) Turn engine start switch to OFF
position (TM 10-3930-673-10).
TRANSDUCER
WIRE 15
TR01535
2-555
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals