 |
|||
|
|
|||
|
Page Title:
BLACKOUT STOPLIGHTS DO NOT OPERATE - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-20-1
CONTINUITY TEST
C
FEMALE
(1) Disconnect ground female connector
ONNECTOR
from male ground connector.
(2) Set multimeter to ohms.
(3) Connect multimeter positive lead (+) to
ground outside conductor at brake light
socket.
(4) Connect multimeter negative lead () to
ground cable.
GROUND
(a) If continuity is present, replace
bulb (Para 8-33).
(b) If continuity is not present, repair
wire 2 (Para 8-49) or replace
blackout brake light socket
(Para 8-33).
(5) Connect ground female connector to
MALE
C
male ground connector.
ONNECTOR
OUTSIDE
C
ONDUCTOR
P2-1
CONNECTOR P2
CONTINUITY TEST
(1) Set multimeter to ohms.
CONNECTOR
J
(2) Disconnect connector J2 from
2
connector P2.
CONNECTOR P2
(3) Connect multimeter positive lead (+) to
wire 9 at starter motor solenoid.
(4) Connect multimeter negative lead () to
connector P2-1.
WIRE 9
(a) If continuity is present, go to
Step 19 of this fault.
(b) If continuity is not present, repair
wire 9 or connector P2 (Para 8-49).
(5) Connect connector J2 to connector P2.
STARTER SOLENOID
TR01652
2-367
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals