|
|
TM 10-3930-673-20-1
VOLTAGE TEST
(1) Remove battery cover (Para 8-42).
(2) Disconnect negative battery cable from
negative side of battery (Para 8-44).
(3) Set multimeter to volts dc.
(4) Connect multimeter positive lead (+) to
starting motor solenoid where wire 9
connects.
(5) Connect multimeter negative lead () to
known good ground.
(6) Connect negative battery cable to
negative side of battery (Para 8-44).
(a) If 24 vdc is present, go to Step 5 of
this fault.
(b) If 24 vdc is not present, go to
Step 4 of this fault.
WIRE 9
TR01563
STARTER SOLENOID
2-247
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |