Table 2-1. Unit Preventive Maintenance Checks and Services - continued

TM 10-3930-673-20-1

Table 2-1. Unit Preventive Maintenance Checks and Services (Continued)

Location

Item

Item to Check/

No.

Interval

Service

Procedure

TR00964

Lubricate daily during periods of high cycling or high loading.

Weekly

Lubricate attachment pivot pin with GAA as required.

LUBE POINTS

(Teflon Dry Lube)

(2 places)

4.1

Weekly

Fork Shaft and Fork

Clean and lubricate as follows:

Wear Pad Sliding

Surface

a. Wipe exposed area of fork shaft and sliding surface of two wear

pads with clean cloth. Use nylon bristle brush to remove any

corrosion or dirt build-up.

b. Apply light coat of teflon dry lube (Item 15.1, Appendix C). to fork

shaft and wear pad sliding surface.

c. Move forks left or right to expose remaining area of fork shaft.

d. Apply dry lube to exposed area.