Section I. INTRODUCTION - TM-10-3930-668-24P0006

TM 10-3930-668-24P

UNIT, DIRECT SUPPORT AND

GENERAL SUPPORT MAINTENANCE

REPAIR PARTS AND SPECIAL TOOLS LIST

Section I. INTRODUCTION

SCOPE.

This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic

equipment (TMDE); and other special support equipment required for performance of Unit, Direct Support, and General

Support Maintenance of the M4t9 1SKI Forklift Truck. It authorizes the requisitioning, issue, and disposition of spares,

repair parts and special tools as indicated by the source, maintenance, and recoverability (SMR) code.

GENERAL

In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following sections:

a. Section II. Repair Part List. A list of spares and repair parts authorized by this RPSTL for use in the

performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts.

Parts Lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group listed in

ascending figure and item number sequence. Bulk materials are listed by item name in FIG BULK at the end of the

section. Repair parts kits or sets are listed separately in their own functional group within Section II. Repair parts for

repairable special tools are also listed in the section.

Section III. Special Tools List. Not Applicable.

c. Section IV. Cross-Reference Indexes. A list, in National item identification number (NIIN) sequence, of all

National stock numbered items appearing in the listings, followed by a list in alphanumeric sequence of all part numbers

appearing in the listings. National stock numbers and part numbers are cross-referenced to each illustration figure and

item number appearance. The figure and item number index lists figure and item numbers in alphanumeric sequence and

cross-references NSN, CAGEC, and part numbers.

EXPLANATION OF COLUMNS (SECTION II).

Item No. (Column (1)). Indicates the number used to identify items called out in the illustration.

b. SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code

containing supply/requisitioning information, maintenance category authorization criteria, and disposition instruction, as

shown in the following breakout: