 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
FRAME TILT CYLINDER MAINTENANCE - CONTINUED
0306 00
ASSEMBLY
NOTE
Wipe all sealing surfaces on cylinder clean and dry. Apply film of clean hydraulic oil to all seals as they are
installed.
1.
Install new seal (18) and rod wiper (19) inside gland (9). Ensure that seal (18) lip is positioned the same way as it was
before disassembly.
2.
Install new back-up ring (17) and new O-ring (11) on outside diameter of gland (9).
3.
Slide gland (9) onto rod (8).
4.
Lubricate piston (15) inner diameter with clean lubricating oil. Install new O-ring (16) inside bore of piston (15).
WARNING
Solvent cleaning compound, MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-
rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-ven-
tilated areas. Keep away from open flames and other sources of ignition.
5.
Use cleaning solvent and clean rag to clean threads on
15
rod (8) and new nut (14).
14
16
6.
Slide piston (15) onto rod (8).
17
11
7.
Apply loctite on threads of rod (8) and new nut (14).
9
Install nut new (14) on rod (8).
18
19
8
409-1390
0306 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals