 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
TURBOCHARGER ASSEMBLY REPAIR (165 HP) - CONTINUED
0282 00
ASSEMBLY - CONTINUED
23.
Install impeller (18), bearing housing (14) and turbo-
charger shaft and wheel (19) into turbine housing (1)
18
as an assembly.
24.
Align match marks on bearing housing (14) and tur-
bine housing (1) that were made at disassembly.
25.
Install two clamp plates (17) and four screws (16) on
turbine housing (1). Torque bolts to 120 lb-in. (163
Nm).
14
20
21
19
22
409-1823
26.
Measure turbocharger shaft and wheel (19) end play.
27.
Attach a dial indicator to the turbine housing (1).
Adjust dial indicator-so that plunger is against shaft
and wheel (19) end.
28.
Set dial indicator to zero.
29.
Move turbocharger shaft and wheel (19) and impeller
19
(18) assembly back and forth and read end play on dial
indicator. If end play is less than 0.0015 in. (0.381
1
mm), or greater than 0.0037 in. (0.939 mm), disassem-
18
ble turbocharger, steps 8-25 and check for problem.
Replace defective parts and assemble, steps 2-26.
409-1830
0282 00-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals