 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
BOOM WEAR PADS REPLACEMENT - CONTINUED
0266 00
CLEANING
See Cleaning instructions (WP 0316 00).
IINSTALLATION
1.
Install new inserts (4) in wear pads.
2.
Apply loctite on threads of capscrews (1).
3.
Install capscrews (1), flatwashers (3), shims, spacers, wear pads and new lockwashers (2). Torque capscrews to 30 lb-ft
(40 Nm).
NOTE
Check for proper clearances between wear pads and boom sections during assembly. A total gap of 0.01 to
0.13 in. (0.25 to 3.3 mm) is allowed in both vertical and horizontal directions.
4.
Assemble inner and intermediate booms as necessary (WP 0262 00 and WP 0263 00).
5.
Operate boom and check for proper operation (TM 10-3930-660-10).
END OF WORK PACKAGE
0266 00-3/(-4 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals