 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
STEERING KNUCKLE MAINTENANCE - CONTINUED
0250 00
REMOVAL - CONTINUED
NOTE
Do not mix upper and lower shims. Keep
shims together as a set for assembly.
4.
Remove lower steering knuckle cap (7), thrust washer
(8) and shims (9 thru 11).
5.
Remove upper steering knuckle cap (2) and shims (3
6
thru 5).
6.
Remove grease fittings (6) from steering knuckle caps
A
1
(2 and 7), if necessary.
2
7.
Remove steering knuckle (12) from end of axle.
8.
Repeat steps 1 thru 7 for other side.
1
3
2
4
5
1
7
409-1339
CLEANING
See Cleaning instructions (WP 0316 00).
INSPECTION
See Inspection instructions (WP 0317 00).
INSTALLATION
1.
If removal was necessary, install grease fitting (6) in caps (2 and 7).
2.
Apply grease in bores of steering knuckle for caps.
0250 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals