FRONT PLANETARY WHEEL ENDS REPLACEMENT -832450229

TM 10-3930-660-24-2

FRONT PLANETARY WHEEL ENDS REPLACEMENT

0244 00

THIS WORK PACKAGE COVERS

Removal, Cleaning, Inspection, Installation

INITIAL SETUP

Tools and Special Tools

Personnel Required

Tool kit, general mechanic's (Item 39, WP 0324 00)

Two

Shop equipment, automotive maintenance (Item 21,

References

WP 0324 00)

Planetary hub drag tool (Item 15, WP 0324 00)

Lifting device, 200 lb (91 kg) capacity

4 in. x 4 1/2 in. deep six-point socket

Equipment Condition

Materials/Parts

Front of vehicle raised 8 in. (20.3 cm) and sup-

Compound, sealing (Item 14, WP 0323 00)

ported under front axle (TM 10-3930-660-10)

Oil, lubricating (Item 33, WP 0323 00)

Planetary wheel ends drained (WP 0126 00)

Rag, wiping (Item 40, WP 0323 00)

Wheel assemblies removed (WP 0134 00)

Snap ring (5 and 9)

Front disc brake assemblies removed (WP 0249 00)

Seal (17 and 25)

REMOVAL

NOTE

Mark planetary spider and wheel hub for

correct alignment during installation.

Place a suitable container under planetary wheel end

assembly.

Remove sixteen capscrews (3) and sixteen flatwashers

(4) from planetary spider (1).

3,4

Use three capscrews (3) in jack screw holes (A) and

tighten to remove planetary spider (1).

409-1262