 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-2
TORQUE CONVERTER REPLACEMENT - CONTINUED
0236 00
REMOVAL
1.
Remove nut (1), washer (2) and yoke (3) from torque converter input shaft (4).
2.
Remove twelve hex nuts (5), starwashers (6) and capscrews (7) from torque converter cover (8). Remove torque con-
verter cover and discard starwashers.
3.
Remove torque converter cover (8) from transmission bell housing (9) and place on clean workbench with front cover
facing up.
4.
If required, remove twelve capscrews (10), lockwashers (11) and converter input shaft (4) from torque converter assem-
bly (12). Discard lockwashers.
5.
If required, remove seal (13), snap ring (14) and bearing (15) from torque converter cover (8). Discard seal.
6.
If required, remove grease fitting (16) from torque converter cover (8).
1
2
8
3
15
14 10
12
11
13
9
16
5
6
4
7
409-1138
CLEANING
1.
Remove all rust and corrosion from torque converter input shaft (4) with emery cloth.
See Cleaning instructions (WP 0316 00).
2.
INSPECTION
1.
Check torque converter input shaft (4) for burrs and damage to splines and shaft. If damaged, replace input shaft.
See Inspection instructions (WP 0317 00).
2.
0236 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals