ETHER START ATOMIZER REPLACEMENT (new engine)

12. ETHER START ATOMIZER REPLACE-

MENT (new engine)

AFTER INSTALLATION OF NEW ENGINE REMOVAL

(Figure 22)

a. Remove plug (1) from new engine block.

INSTALLATION (Figure 23)

Note: Install tie wraps as necessary.

a. Apply sealing compound to threads of (From the

kit) Bushing #8530024 (2) and install on new

engine block.

Note: Punch mark on hex must be located on the bottom

side of atomizer when tight.

b. Apply sealing compound to threads of (from the

kit) atomizer #8277101 (3) and install into

bushing (2) on new engine block. Tighten to 25

lb-in.

c. Connect hose (4) to atomizer (3).

SM1730

Figure 22

SM1740

Figure 23

0326 00-15