 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
HYDRAULIC TUBING REPLACEMENT - CONTINUED
0196 00
REMOVAL
1.
Disconnect tubing assemblies (1, 2, and 3) from hose
assemblies.
2
1
2.
Disconnect opposite ends of tubing assemblies (1 thru
4
3) from bulkhead fittings (4 and 5).
3
3.
Loosen capscrews (6) and lockwashers (7) securing
8
four sets of clamp halves (8) to underside of boom.
7
Discard lockwashers.
4.
Remove tubing assemblies (1 thru 3) from vehicle.
6
5
409-4086
INSTALLATION
NOTE
Remove caps and plugs as hoses are installed. Wipe all sealing surfaces on valve and hoses clean and dry.
1.
Loosely connect tubing assemblies (1 thru 3) to respective hose assemblies and to bulkhead fittings (4 and 5).
2.
Secure tubing assemblies (1 thru 3) using capscrews (6), new lockwashers (7) and clamps (8).
3.
Ensure tubing assemblies (1 thru 3) are not binding at either end. Tighten connections securely.
4.
Start engine, check for proper operation and leaks (TM 10-3930-660-10).
END OF WORK PACKAGE
0196 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals