INSTALLATION - TM-10-3930-660-24-10770

TM 10-3930-660-24-1

MLRS ATTACHMENT CONTROL VALVE ASSEMBLY REPLACEMENT - CONTINUED

0176 00

INSTALLATION - CONTINUED

10.

Connect two crossover hoses (7) to carriage tilt cylin-

3,4

der fittings (8) as tagged.

11.

Position cover (6) over valve and align mounting

holes.

12.

Apply loctite to two capscrews (3) and two nuts (5).

13.

Secure cover (6) with two nuts (5), two capscrews (3)

and two new lockwashers (4).

14.

Connect floodlight electrical leads (1) and (2) as

1,2

tagged.

409-668

NOTE

White lead of floodlight connects to lead 71 of vehicle wiring harness. Black lead of floodlight connects to

lead 02 of vehicle wiring harness.

15.

Connect battery cables (WP 0107 00).

16.

Purge air from hydraulic system by cycling each MLRS attachment function five times (TM 10-3930-660-10).

NOTE

Excessive air in hydraulic system may temporarily prevent MLRS attachment functions from operating.

Attempt to operate MLRS attachment functions as required until each function operates smoothly and com-

pletely (TM 10-3930-660-10).

END OF WORK PACKAGE

0176 00-4