 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
COUNTERWEIGHT REPLACEMENT - CONTINUED
0145 00
INSTALLATION - CONTINUED
3.
Carefully lift the counterweight (1) and move it to rear of vehicle to which counterweight is to be attached.
4.
Align the counterweight (1) with the vehicle frame.
5.
Raise the counterweight until the pin holes in counterweight top mounts are approximately 3 in. (7.6 cm) above pin
holes in vehicle frame top mounts.
6.
Carefully move the counterweight toward the vehicle until the counterweight pockets are directly over vehicle frame
mounting pins (5).
CAUTION
Make sure the counterweight bottom mount pockets fully engage around vehicle frame mounting pins at the
rear of the vehicle. If pockets are not engaged, counterweight could tip causing damage to rear of vehicle.
7.
Carefully lower the counterweight (1) until the counterweight pockets engage vehicle frame mounting pins (5).
8.
Remove chain or cable securing counterweight to the lifting forklift.
9.
Install two straight pins (3) and two lock pins (4) to secure counterweight (1) to vehicle.
10.
Carefully lower and remove forks of lifting forklift from under counterweight (1).
11.
If necessary, install load backrest to storage position (TM 10-3930-660-10).
END OF WORK PACKAGE
0145 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals