 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
PROPELLER SHAFTS, FRONT AND REAR DIFFERENTIAL MAINTENANCE - CONTINUED
0124 00
INSTALLATION
1.
Position shaft (1) so it is partially supported by hook
10
11
(7) on frame of vehicle.
7
2.
Apply loctite to four capscrews (8). Secure universal
joint (10) of shaft (1) to yoke (11) of transmission (12)
with four capscrews (8) and four new lockwashers (9).
Torque capscrews to 41 lb-ft (56 Nm).
1
20
8,9
12
409-478
3.
Lift and remove axle end of shaft (1) from hook (7) on
5
vehicle frame.
4.
Apply loctite to four capscrews (2). Secure universal
2,3
7
joint (4) of shaft (1) to yoke (5) on axle (6) with four
capscrews (2) and four new lockwashers (3). Torque
capscrews to 41 lb-ft (56 Nm).
5.
Apply grease to lubrication fittings (16, 20 and 22).
22
1
16
4
6
409-479
6.
Connect battery cables (WP 0107 00).
END OF WORK PACKAGE
0124 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals