 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
PROPELLER SHAFTS, FRONT AND REAR DIFFERENTIAL - CONTINUED
0124 00
ASSEMBLY
1.
If removed, install lubrication fitting (22) to axle end of propeller shaft (1).
2.
Carefully position new seal (21) on transmission end of shaft (1).
3.
Install transmission end of shaft (1) into axle end of shaft (1).
4.
Install new seal (21) on threads of axle end of shaft (1).
22
17
18
1
19
20
21
1
10
409-4034
5.
If removed, install lubrication fitting (20) to universal joint (11).
6.
Align universal joint (10) with yoke (19) on transmission end of shaft (1).
7.
Apply loctite to four capscrews (17). Secure universal joint (10) to yoke (19) with four new lockwashers (18) and four
capscrews (17). Torque capscrews (17) to 44 lb-ft (60 Nm).
8.
If removed, install lubrication fitting (16) to universal joint (4).
9.
Align universal joint (4) with yoke (15) on axle end of shaft (1).
10.
Apply loctite to four capscrews (13). Secure universal joint (4) to yoke (15) with four new lockwashers (14) and four
capscrews (13). Torque capscrews to 41 lb-ft (56 Nm).
14
5
13
16
17
18
15
19
1
20
1
11
409-4035
0124 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals