 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
TRANSMISSION DRIVESHAFT ASSEMBLY MAINTENANCE - CONTINUED
0119 00
ASSEMBLY
1.
If removed, install lubrication fitting (18) to transmission end of driveshaft assembly (1).
2.
Position new seal (17) on engine end of driveshaft assembly (1).
3.
Slide transmission end of driveshaft assembly (1) into engine end of driveshaft assembly (1).
4.
Tighten new seal (17) on threads of transmission end of driveshaft assembly (1).
5.
If removed, install fitting (16) to universal joint (5).
6.
Align universal joint (5) with yoke (15) on transmission end of driveshaft assembly (1).
7.
Apply loctite to four capscrews (13). Secure universal joint (5) to yoke (15) with four new lockwashers (14) and four
capscrews (13). Torque capscrews (13) to 41 lb-ft (56 Nm).
8.
Install key (11) in groove on driveshaft assembly (1).
9.
Push coupling (9) on driveshaft assembly (1).
10.
Install key (12) in groove on engine coupling (9).
INSTALLATION
1.
Position engine coupling (9) with driveshaft assembly (1) into engine dampener (7).
2.
Apply loctite to three capscrews (8) and secure cou-
pling (9) to engine with capscrews (8). Torque cap-
screws to 25 lb-ft (34 Nm).
3.
Apply loctite to four capscrews (3). Secure universal
joint (5) of driveshaft assembly (1) to input yoke (6) of
transmission (2) with four capscrews (3) and four new
lockwashers (4). Torque capscrews (3) to 41 lb-ft (55
Nm).
2
3,4
4.
Apply grease to lubrication fittings.
5.
Install transmission cover (WP 0150 00).
6.
Connect battery cables (WP 0107 00).
7.
Start engine and check for proper operation (TM 10-
3930-660-10).
1
5
6
409-480
END OF WORK PACKAGE
0119 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals