 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
TRANSMISSION DRIVESHAFT ASSEMBLY MAINTENANCE - CONTINUED
0119 00
REMOVAL - CONTINUED
2.
Remove driveshaft assembly (1) from engine damp-
ener (7).
8 9
3.
Remove three capscrews (8) from engine coupling (9).
7
4.
Temporarily install two of the capscrews (8) removed
in step 3 into two jacking holes (10) of engine cou-
pling (9).
5.
Tighten two capscrews (8) evenly until driveshaft
assembly (1) and engine coupling (9) separate from
engine dampener (7).
6.
Remove coupling (9) and driveshaft assembly (1)
1
10
from vehicle as an assembly.
409-481
DISASSEMBLY
1.
Remove two capscrews (8) from jacking holes (10).
18
15
5
2.
Tap and remove coupling (9) from driveshaft assem-
14
13
bly (1).
3.
Remove key (11) from keyway of driveshaft assembly
16
(1).
4.
If necessary, remove key (12) from coupling (9).
17
5.
Remove four capscrews (13) and four lockwashers
1
(14) securing universal joint (5) to yoke (15) of drive-
shaft assembly (1). Discard lockwashers.
11
6.
Separate universal joint (5) from yoke (15).
9
7.
If necessary, remove lubrication fitting (16) from uni-
versal joint (5).
8.
Slide engine end of driveshaft assembly (1) out of
transmission end of driveshaft assembly (1).
12
409-482
9.
Remove seal (17) from transmission end of driveshaft
assembly (1). Discard seal.
10.
If necessary, remove lubrication fitting (18) from transmission end of driveshaft assembly (1).
0119 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals