 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
TRANSMISSION SHIFTER MAINTENANCE - CONTINUED
0114 00
INSTALLATION - CONTINUED
10.
Support and position shifter (1) over front console (2).
11.
Connect two electrical leads (10) of back-up alarm switch (11) to vehicle wiring harness (12) as tagged in Removal.
12.
Position transmission cable assemblies (3 and 4) on shifter (1) under clamps (9) as tagged in Removal.
13.
Secure cable assemblies (3 and 4) to shifter (1) with clamps (9) and new locknuts (8).
14.
Position universal swivels (7) of cable assemblies (3 and 4) on shifter (1) and secure with washers (6) and new cotter
pins (5).
15.
Install left-hand instrument panel and transmission shifter to front console (WP 0067 00).
ADJUSTMENT
NOTE
Shifter adjustment procedures for the travel select cable assembly and the range select cable assembly are
essentially similar. Adjustment shown below.
1.
Remove left-hand instrument panel and transmission
1
shifter from front console (WP 0067 00).
2.
Remove cotter pin (5) and washer (6) from universal
swivel (7) of cable assembly (3). Remove universal
swivel from shifter (1). Discard cotter pin.
3 11
3.
Loosen jamnut (43) and turn universal swivel (7) in or
out as required for proper adjustment. Tighten jamnut.
4
4.
Position universal swivel (7) of cable assembly (3) on
shifter (1) and secure with washer (6) and new cotter
10,12
pin (5).
5.
Verify that shifter (1) operates properly (TM 10-3930-
660-10). Readjust cable assembly (3), if necessary.
2
6
7
7
5
3
8
4
9
8
9
409-4119
6.
Install left-hand instrument panel and transmission shifter to front console (WP 0067 00).
END OF WORK PACKAGE
0114 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals