 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
REAR TURN SIGNAL LIGHTS REPLACEMENT - CONTINUED
0098 00
BULB REPLACEMENT
1.
Remove two nuts (10) and two lockwashers (11). Discard two lockwashers.
2.
Remove two screws (12) from lens (13) and pull lens from socket plate (14).
3.
Carefully push and twist old bulb (16) counterclockwise until it releases from the socket.
4.
Remove and discard old bulb (16).
5.
Carefully push and twist new bulb (16) clockwise in the socket until it locks into place.
6.
Align lens (13) on socket plate (14). Position two screws (12) through holes on lens.
7.
Secure lens (13) with two new lockwashers (11) and nuts (10).
8.
Connect battery cables (WP 0107 00).
9.
Verify signal lights operate properly (TM 10-3930-660-10).
END OF WORK PACKAGE
0098 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals