 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
JOYSTICK HARNESS ASSEMBLY MAINTENANCE - CONTINUED
0078 00
TESTING
NOTE
Do not operate the engine while performing this test.
The following test can be performed without removing the joystick from the vehicle.
1.
Remove four capscrews (12) and plate (13).
2.
Turn the ignition switch to the ON position but do not
14
start the engine.
12
13
409-292
3.
Perform operation test of electric joystick.
4.
Move the electric joystick handle (14) fully forward
and hold it in this position. Indicator light (15) should
14
be on.
5.
Move the electric joystick handle (14) fully rearward
and hold it in this position. Indicator light (16) should
be on.
6.
Move the electric joystick handle (14) fully to the
right and hold it in this position. Indicator light (17)
should be on.
7.
Move the electric joystick handle (14) fully to the left
and hold it in this position. Indicator light (18) should
be on.
17
18
8.
If indicator lights (15 through 18) fail to illuminate as
15
described in the above steps, replace the electric joy-
16
stick as described in Removal.
9.
After testing is completed, turn ignition switch to OFF
409-293
position (TM 10-3930-660-10).
10.
Install four capscrews (12) and plate (13).
END OF WORK PACKAGE
0078 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals