 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
CIRCUIT BREAKERS REPLACEMENT - CONTINUED
0071 00
INSTALLATION - CONTINUED
1.
From outside of cab (9), install two screws (12).
NOTE
Apply loctite to threaded ends of screws.
2.
From inside of cab (9), position bracket (8) on threaded ends of two screws (12). Secure bracket (8) with two new lock-
washers (11) and two nuts (10).
3.
Install circuit breakers (6) to bracket (8) as tagged. Refer to steps 5 and 6 below.
4.
Install circuit breaker (6) by pushing circuit breaker (6) straight into bracket (8) until circuit breaker (6) snaps into place.
NOTE
Install wire leads to circuit breaker terminals as tagged.
5.
Position wire lead (7) onto circuit breaker (6). Secure with two nuts (4) and two new lockwashers (5).
NOTE
Apply loctite to threads of capscrews.
6.
Position access cover (2) on base of operator console
(3) and secure with four capscrews (1).
7.
Connect battery cables (WP 0107 00).
1
2
3
409-278
END OF WORK PACKAGE
0071 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals