NEUTRAL SAFETY SWITCH MAINTENANCE

TM 10-3930-660-24-1

NEUTRAL SAFETY SWITCH MAINTENANCE

0066 00

THIS WORK PACKAGE COVERS

Inspection, Removal, Installation

INITIAL SETUP

Equipment Condition

Tools and Special Tools

Vehicle parked on level ground (TM 10-3930-660-

Tool kit, general mechanic's (Item 39, WP 0324 00)

10)

Materials/Parts

Lockwasher (2)

INSPECTION

WARNING

Move vehicle to an open area to perform inspection. Alert personnel to stay away from front and rear of

vehicle during inspection. Vehicle may start and move suddenly, possibly causing injury. Make sure wheels

are straight before performing inspection.

NOTE

See TM 10-3930-660-10 for operating instructions.

Straighten wheels and turn engine off.

Put travel select lever in the forward (F) position.

With parking brake on and brake pedal depressed, try to start engine. Turn engine off immediately if it starts (TM 10-

3930-660-10).

If engine started in step 3, replace neutral safety switch. See Removal in this work package. If engine did not start, go to

next step.

Perform step 3, with travel select lever in the reverse (R) position.

If engine started in step 5, replace neutral safety switch.