 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-660-24-1
THERMOSTAT AND WATER OUTLET REPLACEMENT - CONTINUED
0055 00
REMOVAL - CONTINUED
NOTE
Note position of thermostat and gasket in water outlet for use during installation.
6.
Remove water outlet (3), thermostat (9), gasket (10) and lifting bracket (11) from engine. Discard gasket.
7.
Remove two bolts (12) and one capscrew (13) from
12
3
thermostat housing (3).
8.
Remove water outlet (3), thermostat (9), gasket (10)
9
11
10
and lifting bracket (11) from engine. Discard gasket.
INSTALLATION
CAUTION
13
Make sure thermostat and gasket are properly
positioned as noted during removal to avoid
coolant leaks and thermostat malfunction.
409-239
NOTE
Clean all sealing surfaces thoroughly before installing thermostat, new gasket and water outlet.
1.
Install water outlet (3), thermostat (9), new gasket (10)
3
and lifting bracket (11) to engine.
B
A
2.
Position thermostat (9), in water outlet (3), with pin
9
(A) in notch (B) and tang (C) in slot (D).
D
C
409-240
3.
Position water outlet (3), thermostat (9), new gasket (10) and lifting bracket (11), on engine.
4.
Install two bolts (12) and one capscrew (13) to water outlet (3). Torque bolts (12) and capscrew to 6 lb-ft (8 Nm).
0055 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals