Table 1. Unit Preventive Maintenance Checks and Services (PMCS) for 6K Forklift - Continued.

TM 10-3930-660-24-1

UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED

0011 00

Table 1. Unit Preventive Maintenance Checks and Services (PMCS) for 6K Forklift - Continued.

Location

Item To

Man-

Check/

Hours

Item No.

Interval

Procedure

Service

Semi-

1.0

Transmis-

(Con't)

annual

Hours

sion

TRANSMISSION FILL

(OE/MDO)

DRAIN

409-1915

a. Check brake pads for wear. If brake pads are worn to a thickness of 1/8

Semi-

Service

in. (3.175 mm), replace pads (WP 0249 00).

annual

Brakes

b. Check brake discs for deep grooves, cracks and distortion. If discs are

deeply grooved, cracked or distorted, replace discs (WP 0249 00).

Test drive forklift and check driveshafts for noise and vibration. If noise or

Semi-

Drive-

vibration is evident, determine cause. Replace driveshaft if necessary (WP

annual

shafts

0124 00).

Remove boom cover to access visible boom wear pads. For boom inspec-

Semi-

Boom

tion procedures, refer to WP 0190 00. Replace worn boom wear pads (WP

annual

Assembly

0190 00).

a. Open right engine access door and replace primary and secondary fuel

Semi-

Fuel

filters (WP 0040 00).

annual

System

b. Remove filler cap from fuel tank. Clean cap and inspect gasket. Replace

gasket if damaged.

c. Remove strainer from top of fuel tank (WP 0033 00). Clean any debris

from inside strainer. Replace strainer if damaged.

0011 00-9