ADJUSTING CARRIAGE ROLLERS - continued - TM-10-3930-647-14-P0368

But before adding any shims, we must center this set of car-

r i a g e rollers with the side thrust rollers. Using a steel

r u l e , carefully measure the distance between the face of the

side thrust roller and the side of the carriage roller.

Do this on both sides of the carriage. To obtain equal dis-

tance between side thrust and main carriage rollers on both

sides, we find that two shims need to be added to the right

r o l l e r and one to the left roller.

Remove rollers by working them off with pry bars or tapping

them loose with a soft faced hammer.

Add the two shims to the right side . . .

5-138