|
|
When both carriage anchor pins have been replaced with bolts,
stand away from the carriage, start the truck, and raise the
l i f t cylinder until the carriage is clear of the post.
Remove the post . . .
. . . and place it beneath the forks just in front of the fork
heels. Slide a pallet about three-fourths of the way onto the
forks. Then lower the lift cylinder all the way and turn off
the key. The carriage chains will be slack.
Remove the bolts from both carriage anchor points.
5-131
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |