UPRIGHT RACKING

. . . secondary piston rod . . .

Fig. 16182

. . . and feed tube assembly should be checked. Cylinder rods

should be free of grit, chemical residues, paint and nicks on

ground or polished surfaces.

Fig. 16183

UPRIGHT RACKING

Upright racking occurs when tilt cylinder strokes are unequal.

Tilt cylinders should be checked to determine if cylinder

strokes . . .

Fig, 16184

. . . are equal . To check for racking, start the/truck and

raise the carriage about six inches off the ground. Operate

For adjustment procedures

t h e tilt circuit to full forward tilt and backward tilt

several times. Observe to see if cylinder strokes are equal

covering your particular model

. . . movement of both cylinders should start and stop at the

same time. If not, the yokes at the piston rods should be

adjusted.

... refer to the INDEX for

`Tilt Cylinder Rod Adjustment'.

5-122