INPUT SHAFT ASSEMBLY - continued - TM-10-3930-647-14-P0283

STEP 51. Install the output shaft fastener and

t o r q u e to specifications.

Step 51. Plate 10369

STEP 52. Using an inch pound torque wrench

install on outputshaft retainer. Turn shaft

and take the reading required to keep shaft

rotating . . . . do not take reading required to

s t a r t shaft rotating.

If torque to rotate shaft is above

STEP 53.

8 to 13 inch pound add shims.

If shaft is below torque specifications sub-

tract shims.

SEE SPECIFICATION PAGE FOR BEARING PRE-LOAD.

Step 52 - 53. Plate 10370

5-80AD