Figure 1. Exhaust System: Muffler, Exhaust and Tail Pipe (Typical)

TM 10-3930-644-14&P

2. To remove exhaust pipe, loosen clamp securing

D. INSTALLATION

it to muffler and remove capscrews mounting

exhaust pipe to exhaust manifold.

1. Install rubber grommets in muffler mounting

bracket and install muffler.

3. To rem ove tail pipe, loosen clamp securing it to

muffler, and remove clamp securing it to truck

2. Secure exhaust pipe to muffler with clamp, and

frame.

using new gasket, secure to manifold with

capscrews.

4. To remove muffler, disconnect exhaust and tail

pipes and remove the capscrews and washers

3. Secure tail pipe to muffler and truck frame with

securing it to the truck frame.

clamp.

5. After muffler has been remo ved from truck,

4. Inspect all connections

for

exhaust

leaks.

remove the rubber grommets from the mounting

Repair as is necessary.

bracket.

5. Lower left side of trick and replace the left hand

side engine panel.

Figure 1. Exhaust System: Muffler, Exhaust and Tail Pipe (Typical)

3-114