CRANKSHAFT INSTALLATION

TM 10-3930-644-14&P

25. Install hydraulic pump and connect tube and

a. Oil pan drain installed/secure.

hose to pump and reservoir.

b. Engine

block

pipe-plug

installed/

26. Install and secure fan blade.

tightened.

27. Adjust alternator strap for approved fan belt

31.

Fill radiator, including anti-freeze, if required.

tension and lock (1/2" depression @ 10 lbs. of

32.

Fill crankcase with recommended engine oil,

force).

allowing extra half-quart if oil filter was changed.

28. Reconnect and tighten water bypass tube.

33.

Start engine, check for proper idle/ operation

29. Reconnect upper and lower radiator hoses.

and check for any water, oil or fuel leaks.

Secure both with respective hose clamps.

34.

Turn engine off.

Connect transmission oil cooler lines.

30. Ensure following conditions exist:

R-104-1

3-22