INSTALLATION - TM-10-3930-644-14-P0103

TM 10-3930-644-14&P

2. At the transmission end of the assembly,

of 25-30 lb-ft DRY THREADS, or 20-24 lb-ft

remove the capscrews that attach the cross

LUBRICATED THREADS.

assembly to the output flange.

2. Position transmission end of universal joint so

3. At the differential end of the assembly, remove

holes in cross assembly align with holes in

the capscrews that attach the cross assembly to

output flange. Insert capscrews and tighten

the differential carrier flange.

them to specified torque of 25-30 lb-ft DRY

THREADS, or 20-24 lb-ft LUBRICATED

4. Remove the entire universal joint assembly from

THREADS.

the lift truck.

NOTE

E. INSTALLATION

Make certain ALL CAPSCREWS are

tightened to SPECIFIED TORQUE.

1. Position the differential end of the universal joint

so the holes in the cross assembly align with the

3. Remove blocks supporting the lift truck and

holes in the differential carrier flange. Insert

lower the truck to the floor.

capscrews and tighten them to specified torque

2-62