INSPECTION - TM-10-3930-638-24-P1019

TM 10-3930-638-24&P

4-5. AXLE MAINTENANCE (cont)

a. Differential Carrier (cont).

REMARKS

ACTION

ITEM

LOCATION

STEP

CLEANING (cont)

Use cleaning solvent P-D-680. Dry with

All other parts

clean, soft, lintless, absorbent cloths

INSPECTION

Check for wear, pitting, or damage; replace

Inspect

Bearings (20, 23, and

part if any of these conditions are

25), bearing cups

(7, 21, and 22)

observed

Check gear teeth and splines for nicked,

Pinion shaft (19)

Inspect

cracked, broken, scored, or worn condi-

tion. Remove burrs or nicks with soft

hone or crocus cloth. Replace badly

damaged or worn part

NOTE

Pinion shaft (19) and ring gear (para 4-5b, key number 16) shall

be replaced as a matched set.

Check for wear, damage and nicks. Check

Bearing adjusting

Inspect

ring (6)

threads for damage. If any of these con-

ditions are observed, replace part

Check for cracks, breaks, burrs, and dam-

Pinion cage (17) and

Inspect

age to machined surfaces. Remove burrs

differential carrier (27)

and minor surface irregularities with soft

hone or crocus cloth. Replace cracked

or damaged parts

Yoke (13)

Check for cracks, burrs, twisted splines,

Inspect

and other damage. Remove burrs with

soft hone or crocus cloth. Replace part

if cracked or splines badly twisted

Inspect

Check for damage and wear; replace part if

All other parts

damaged or worn

NOTE

Immediately after performing inspection, coat all parts with light

oil to prevent corrosion.

Change 2

4-241