DISASSEMBLY (cont) - TM-10-3930-638-24-P1018

TM 10-3930-638-24&P

4-5. AXLE MAINTENANCE (cont)

a. Differential Carrier (cont).

ACTION

REMARKS

ITEM

LOCATION

STEP

DISASSEMBLY (cont)

Pinion shaft

Remove

Use puller to remove from pinion shaft

a. Inner bearing

(19)

cone (23)

Remove

b. Retaining ring

(24)

Use puller to remove from pinion shaft

c. Roller bearing (25)

Remove

Differential

Plug (26)

Remove

carrier (27)

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immedi-

ately, and obtain medical aid immediately.

Bearings (20, 23,

Clean

Use cleaning solvent P-D-680; soak in

and 25)

cleaning solvent then remove and strike

flat of bearing against block of wood to

dislodge solidified lubricant particles.

Dry with clean, soft, lintless, absorbent

cloths. Don't use compressed air to dry

bearings

CAUTION

Don't immerse differential case and gear assembly (4) in cleaning

solvent.

NOTE

If differential case and gear assembly has been repaired as described

in paragraph 4-5b don't perform following step.

Differential case and

Clean

Use clean, soft, lintless, absorbent cloth

gear assembly (4)

moistened with cleaning solvent P-D-680

to remove dirt and lubricant

4-240

Change 2