DISASSEMBLY (cont) - TM-10-3930-638-24-P0996

TM 10-3930-638-24&P

4-4.

TRANSMISSION

MAINTENANCE

(cont)

h. Third Clutch Assembly (cont).

REMARKS

ACTION

ITEM

LOCATION

STEP

DISASSEMBLY (cont)

Retaining ring (1,0)

Remove and

Remove through opening in sleeve; care-

fully and slowly release pressure on

discard

spring; then remove sleeve

Spring retainer (9)

Remove

Piston return

Remove

spring (11)

Invert

Third clutch shaft

drum and plug

assembly (15)

Remove

Clutch piston (12)

Tap third clutch shaft drum and plug as-

sembly on block of wood to remove

Remove and

Outer clutch piston

seal (13)

discard

Inner clutch piston

Remove and

seal (14)

discard

CLEANING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immedi-

ately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air. Fail-

ure to do so could cause serious injury to eyes and possible blind-

ness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

4-218