DISASSEMBLY (cont) - TM-10-3930-638-24-P0934

TM 10-3930-638-24&P

4-4. TRANSMISSION MAINTENANCE (cont)

b. Converter Housing (cont).

ITEM

LOCATION

ACTION

REMARKS

STEP

DISASSEMBLY (cont)

Remove

b. Transmission temper-

ature switch (20)

(cont)

Remove

c. Plug (21)

Remove

d. Stud (22 and 23)

Remove only if damaged and

replacement is required.

NOTE

Perform steps e, f and g only if parts are damaged and require

replacement.

e. Idler gear shaft (24)

Remove

Tap at front and remove from rear

and lockball (25)

f. Reverse idler gear

Remove

Pry from converter housing

shaft (26)

Remove

g. Pin (27)

Remove

Converter

a. Pipe plug (28, 29,

housing

and 30)

Remove

b. Breather(31)

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parta is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eves, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immedi-

ately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air. Fail.

ure to do so could cause serious injury to eyes and possible blind-

ness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

Change 1

4-156