DISASSEMBLY - TM-10-3930-638-24-P0736

TM 10-3930-638-24&P

3-30. HYDRAULIC LIFT SYSTEM MAINTENANCE (cont)-

c. Sideshift Cylinder Assembly (cont).

ITEM

REMARKS

ACTION

STEP

LOCATION

DISASSEMBLY (cont)

Remove only if

a. Plug (20)

Gland

damaged

assembly (19)

Remove and

b. O-ring(21)

discard

c. Back-up ring (22)

Remove and

discard

Remove and

d. Wiper (23)

discard

e. Seal (24)

Remove and

discard

CLEANING

WARNING

Dry cleaning solvent (P-D-680, used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immedi-

ately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air. Fail-

ure to do so could cause serious injury to eyes and possible blind-

ness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

AH parts

Clean

Use cleaning solvent P-D-680; dry with

compressed air

INSPECTION/REPAIR

Rod (26)

Inspect

Replace if bent, deeply grooved, or scored.

Remove nicks or scratches with medium

grit emery cloth polishing with a rotary

motion

Cylinder (27)

Inspect

Replace if deeply grooved, scored or nicked,

or damaged. Remove nicks or scratches

inside cylinder with medium grit emery

cloth polishing with a rotary motion

3-228