Rear Axle Differential Carrier Assembly (cont).

TM 10-3930-638-24&P

3-20. AXLES AND DIFFERENTIAL CARRIER ASSEMBLIES MAINTENANCE (cont)

d. Rear Axle Differential Carrier Assembly (cont).

ITEM

REMARKS

LOCATION

STEP

ACTION

AXLE HOUSING CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immed-

iately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air. Failure

to do so could cause serious injury to eyes and possible blindness.

If you hurt your eyes or if a foreign object is blown into your eyes,

seek medical attention immediately.

Remove accumulation of dirt, grit, or gum from axle housing

Differential carrier bore

Axle housing

bowl. Clean with cleaning solvent P-D-680; dry with moisture

free compressed air. Remove all traces of sealer from mounting

surface

AXLE HOUSING INSPECTION

Inspect for cracks, nicks and burrs at machined surface.

Differential carrier bore

Axle housing

Remove nicks and burrs with soft stone or crocus cloth

INSTALLATION

Place on roller

a. Differential carrier

Axle housing,

jack and roll into

assembly

differential

position

bore

b. Housing bore

Apply sealer

around mounting

surface

Position in housing

c. Differential carrier

bore

assembly

3-149