|
|
TM 10-3930-638-24&P
3-20. AXLES AND DIFFERENTIAL CARRIER ASSEMBLIES MAINTENANCE (cont)
d. Rear Axle Differential Carrier Assembly (cont).
REMARKS
ITEM
ACTION
LOCATION
STEP
REMOVAL
Para 2-39f, steps 1 b and 1 c
Remove
Two axle shafts
2
Side of vehicle
Position as shown
a. Roller jack
3
Axle housing,
Loosen cap screws Prevents assembly from falling after
b. Two cap screws
bottom
remaining cap screws are removed and
shown
assembly broken loose from housing
Remove
c. 14 cap screws and
washers
Loosen by striking
d. Differential carrier
with rawhide
assembly
mallet
e. Two cap screws and
Remove
washers
Use small pinch bar with rounded end
f. Differential carrier
Remove to clean
to straighten assembly in housing bore
assembly
work area
3-148
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |